Shenzhen Exportise Electronic Firm
Main products:PCI add-on cards,PCI-E add-on cards,I/O add-on cards
Contact Us
  • Contact Person : Mr. Raven Stu
  • Company Name : Shenzhen Exportise Electronic Firm
  • Tel : 86---075586136180-308
  • Fax : 86---075586136180-802 Address: Room 723, East Wing, Xinghua Building, No. 2018 Shennan Road, Futian District, Shenzhen, China Zip: 518031 Country/Region: China (Mainland) City: Shenzhen
  • Address : ,Shenzhen,Room 723, East Wing, Xinghua Building, No. 2018 Shennan Road, Futian District, Shenzhen, China
  • Country/Region : China
  • Zip : 518031

Quad-CF PCI Controller card

Quad-CF PCI Controller card
Product Detailed
Quad-CF PCI Controller card 1.Large capacity SSD 2.4 CF combined to be a large volume via RAID 0,1,10 or 4 separate drives Quad-CF PCI Controller card


Quad-CF PCI Controller card is solution for creating a low cost large capacity SSD (solid state drive). Designed to fit into any PCI slot, either standard height or low profile, this adapter allows as many as 4 CF (Compact Flash) media of any capacity to be used like ordinary hard drives in any system. Using the built-in firmware utility, the 4 CF cards can be combined to become one large volume by configuring them as RAID 0, RAID1, or RAID 10 for redundancy or as 4 separate drives.


Enable CF to be used like Solid State Drive (SSD)Connects up to 4 CF - type I/II cardsCF can be configured as 4 individual drives or in RAID 0, RAID 1, RAID 10CF card can be used as boot device or for extra storageFits standard height or low profile systemLED connector for power and drive activitySupports UDMA, DMA, and PIO modesSupports DOS, Windows 98/ME, NT 4.0, 2000, XP, Vista, Linux kernel 2.4+note: Only fixed disk type Compact Flash can be used to create RAID sets.Removable type CF can only be used as individual drives. Use the SilCfgManagement utility to see whether the CF card is fixed disk or removable type CF. Otherwise, use Diskpart which is included with Windows XP.Connect up to 4 Compact Flash Type I /II cardsCF slot 1 and 2 support Type II and MicroDrive4 CF can be set as individual drive or as RAID 0 (Striped), RAID 1 (Mirrored), and RAID 10 (Mirrored Striped)CF card can be bootable device containing OS and applicationSiICfg Management Utility under Windows for RAID and device status / reportLED connector(HDD_LED) for Power and Drive ActivityPCI BUS slot compatibleCompliant with PCI specification, revision 2.2Integrated PCI DMA engines32-bit, 33MHz fully compliant PCI host interfaceSupports UDMA, DMA, and PIO modesFeatures one 256-byte FIFO (32-bit x 64 deep) for host reads and writesFeatures command buffering from the PCI to CFFeatures Virtual DMA: Bus master transfer on the PCI bus and PIO transfer on the ATA BusSupports DOS, Windows 98/ME, NT 4.0, 2000, XP, Vista, Linux kernel 2.4+RAID 10 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring

Quad-CF PCI Controller card

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.